Guide · 7 min read

Sizing and printing QR codes

"Make it big enough" is not a specification. Here is the arithmetic that turns a scanning distance into a physical size, plus the printing details that quietly break codes.

The rule of ten

The most useful shortcut in the field: a QR code needs to be roughly one tenth of the scanning distance across. A code read from 300 mm away should be at least 30 mm wide. Read from 2 metres, it needs about 200 mm.

This is a rule of thumb, not a law. It assumes a reasonably dense code, decent light and a modern phone. Sparse codes (a short URL, a phone number) tolerate half that. Dense ones — long vCards, text-heavy payloads — need more.

Scanning distanceMinimum widthTypical placement
150 mm15–20 mmBusiness card, product label
300 mm30 mmTable tent, till receipt
600 mm60 mmShop counter, door sign
2 m200 mmPoster, window decal
5 m500 mm +Billboard, vehicle livery

Why "300 DPI" is not the whole answer

Print shops talk in DPI; QR codes care about something more specific: module size. A QR code is a grid, and each cell in that grid needs to survive the printing process as a distinct square.

A version 3 code (29×29 modules) at 30 mm gives you roughly 1 mm modules — comfortable. A version 10 code (57×57) at the same 30 mm gives 0.53 mm modules — borderline. Same physical size, very different reliability, because the payload is longer.

The practical target is at least 0.4 mm per module for offset and digital printing, and 0.6 mm for anything rough: newsprint, fabric, engraved metal, or a surface that will be handled. Below 0.3 mm, dot gain starts merging adjacent modules and the code becomes unreliable regardless of resolution.

To work it out: divide the printed width by the module count. If the answer is under 0.4 mm, print larger or shorten the payload.

Colour: where good designs fail

Scanners measure luminance, not hue. Two colours that look clearly different to you can have nearly identical brightness and read as a flat grey rectangle.

  • Keep foreground luminance low and background high. Dark navy on cream works. Mid-blue on mid-green does not.
  • Avoid red on green or green on red. Their luminance is close, and colour-blind users lose the distinction entirely.
  • Do not invert unless you test. Light modules on a dark background are valid QR codes, but some older scanner apps only look for dark-on-light.
  • Watch CMYK shifts. A deep indigo specified in RGB can print as a lighter, muddier blue. Ask for a physical proof and scan it.

If you need colour for brand reasons, keep the contrast ratio high — think white text on a dark solid, not two mid-tones together.

The quiet zone is not optional

Every QR code needs a blank border, at least four modules wide, on all four sides. This is the quiet zone, and it is what lets the scanner find the code's edges against a busy background.

Designers routinely violate it by placing the code in a tight box, cropping it flush to a photo, or running text right up against the edge. If the background behind the code is dark or patterned, extend the white margin further — six modules is safer.

Materials and durability

SurfaceWatch out forFix
Matte paperInk bleed on cheap stockUse 150 gsm or heavier, uncoated
Gloss laminateSpecular glare under direct lightSwitch to matte laminate
Vinyl / outdoor decalUV fading within a seasonUV-resistant ink, laminated print
Fabric / apparelWeave distortion, stretchingPrint larger, test after washing
Metal / engravingLow contrast between engraved and baseFill engraving with dark paint
Curved bottlesGrid distortion across the curveFlat label, or keep code on the flat face

What to tell your printer

A short brief prevents most reprints:

  • Supply a vector file (SVG or PDF) and state the intended final width in millimetres.
  • Ask for a physical proof of the actual code — not a PDF on screen.
  • Specify matte finish, and no varnish or spot UV over the code area.
  • Confirm the quiet zone will be preserved and not trimmed by the die cut.
  • Request that the code is not placed across a fold, seam or perforation.

Scan the proof with two phones, at the real distance, in the lighting where it will live. A code that works in a bright office can fail in a dim bar.

Frequently asked questions

Is there a maximum size?

No practical limit — a billboard code works if it is big enough for the scanning distance. The constraint is the opposite one: making sure the viewer can comfortably frame the whole code in their camera.

Can I print a QR code on a curved surface?

Yes, with care. Keep the code small relative to the radius of curvature so the distortion across its width stays modest, and avoid wrapping it more than about 15 degrees around the curve.

Does a bigger code always scan better?

Up to a point. Beyond roughly 30 cm on a wall, users have to step back to fit it in frame, which can be worse than a 15 cm code at eye level. Match the size to the viewing situation, not the maximum possible.

What resolution should a PNG be?

Work backwards from the print size: pixels = inches × DPI. For a 50 mm code printed at 300 DPI you need about 590 px, so export 1024 px for headroom. Never upscale a smaller file.